Open vSwitch Extensions

Introduction

OpenFlow allows vendor extensions to the protocol. OVS implements many of its own extensions. These days, we typically refer to these as “Open vSwitch extensions” to OpenFlow. You might also see them called “Nicira extensions” after the company that initiated the Open vSwitch project. These extensions have been used to add additional functionality for the desired features not present in the standard OpenFlow protocol.

OpenFlow 1.0 refers to extensions as “vendor extensions”, whereas OpenFlow 1.1 and later call them “experimenter extensions”. These are different names for the same concept and we use them interchangeably.

OVS vendor extension messages in OpenFlow and OVS

Vendor/experimenter request and replies

OpenFlow supports vendor extensions for basic requests and replies. In OpenFlow 1.0, such messages carry OFPT_VENDOR in the struct ofp_header message type field, and in later versions OFPT_EXPERIMENTER. After the header of this message, there is a vendor id field which identifies the vendor. Everything after the vendor ID is vendor specific, but it would typically include a subtype field to identify a particular kind of vendor-specific message. Vendor ids are defined in ovs/include/openflow/openflow-common.h.

To see a list of all the vendor message subtypes that OVS understands, we can refer to ovs/lib/ofp-msgs.h. We can see the instances of enum ofpraw which has a comment containing the keyword NXT, e.g. OFPRAW_NXT_FLOW_MOD below:

/* NXT 1.0+ (13): struct nx_flow_mod, uint8_t[8][]. */
OFPRAW_NXT_FLOW_MOD,

which may be interpreted as follows:

NXT

stands for Nicira extension message.

nx_flow_mod

data that follow the OpenFlow header.

uint8_t[8][]

multiple of 8 data.

13

the subtype for the Flow Mod message when it is sent as a Open vSwitch extension message

OFPRAW_NXT_FLOW_MOD

the Open vSwitch Flow Mod extension message.

For reference, the vendor message header is defined as struct ofp_vendor_header in ovs/lib/ofp-msgs.c.

The general structure of a message with a vendor message type is:

ofp_header(msg_type=VENDOR/EXPERIMENTER) / vendor id / vendor subtype / vendor defined additional data (e.g. nx_flow_mod structure for OFPRAW_NXT_FLOW_MOD message)

Multipart vendor requests and replies

OpenFlow supports “statistics” or “multipart” messages that consist of a sequence of shorter messages with associated content. In OpenFlow 1.0 through 1.2, these are OFPT_STATS_REQUEST requests and OFPT_STATS_REPLY replies, and in OpenFlow 1.3 and later, they are OFPT_MULTIPART_REQUEST``and ``OFPT_MULTIPART_REPLY.

A multipart message carries its own embedded type that denotes the kind of multipart data. Multipart vendor requests and replies use type OFPT_VENDOR in OpenFlow 1.0, OFPST_EXPERIMENTER in OpenFlow 1.1 and 1.2, and OFPMP_EXPERIMENTER in OpenFlow 1.3 and later.

Again if we refer to ovs/lib/ofp-msgs.h, we see the following lines:

/* NXST 1.0 (2): uint8_t[8][]. */
OFPRAW_NXST_FLOW_MONITOR_REQUEST,
NXST

stands for Nicira extension statistics or multipart message.

uint8_t[8][]

multiple of 8 data.

2

the subtype for the Flow Monitor Request message when it is sent as a Flow Monitor Request message with extension vendor id.

OFPRAW_NXST_FLOW_MONITOR_REQUEST

the OpenFlow Flow Monitor extension message.

For reference, the vendor extension stats message header is defined as struct ofp11_vendor_stats_msg in ovs/lib/ofp-msgs.c.

The general structure of a multipart/stats message with vendor type is:

ofp_header(msg_type=STATS/MULTIPART) / stats_msg(type=VENDOR/EXPERIMENTER) /

vendor-id / subtype / vendor defined additional data

Extended Match

OpenFlow 1.0 uses a fixed size flow match structure (struct ofp_match) to define the fields to match in a packet. This is limiting and not extensible. To make the match structure extensible, OVS added as an extension nx_match structure, called NXM, as a series of TLV (type-length-value) entries or nxm_entry. OpenFlow 1.2 standardized NXM as OXM, with extensions of its own. OVS supports standard and extension OXM and NXM TLVs.

For a detailed description of NXM and OXM, please see the OVS fields documentation at https://www.openvswitch.org/support/dist-docs/ovs-fields.7.pdf.

Error Message Extension

In OpenFlow version 1.0 and 1.1, there is no provision to generate vendor specific error codes and does not even provide generic error codes that can apply to problems not anticipated by the OpenFlow specification authors. OVS added a generic “error vendor extension” which uses NXET_VENDOR as type and NXVC_VENDOR_ERROR as code, followed by struct nx_vendor_error with vendor-specific details, followed by at least 64 bytes of the failed request.

OpenFlow version 1.2+ added a OFPET_EXPERIMENTER error type to support vendor specific error codes.

Userspace Datapath - Checksum Offloading ›
‹ C IDL Compound Indexes
Contents
Browse
Navigation